Wiring basic load circuits
Lighting and load circuits are can be easily wired using wires, twist-on wire connectors, switches and outlets. The wiring for both alternating current and direct current circuits is similar. For both types of current ungrounded conductors should be switched rather than grounded conductors. If the system is ungrounded then it does not matter, although a convention should be followed. DC wiring must be installed carefully to respect polarity to ensure no short circuits or damage to lighting. Wire color conventions should always be respected.
In the diagrams below, the dots represent connections typically made with twist-on wire connectors. The [[Grounding system|equipment grounding conductor (EGC) is not included for simplicity.
A circuit with 1 light bulb operated by one switch.
A circuit with 2 lightbulbs operated by one switch.
A circuit with 2 light bulbs operated by two seperate switches.
